ELASTOMERS

MCD has submitted its compounds to an official laboratory to get the necessary approvals for food applications. MCD has the certificates in accordance with the French Law and the FDA regulation.
For your special applications, MCD will propose you the adaquate coumpounds to fit your process.
(Nitrile)

Operation up to 100° C
 high temperature Operation up to 130° C

Their specific features are their remarkable resistance to oils, solvents and grease, whether aliphatic or aromatic.

(Nitrile Hydrogéné)

* Operation up to 150° C

Its physical properties are remarkable even at high temperatures.
Good behaviour at low temperatures
Good resistance to numerous chemically aggressive oils.
* THERBAN. Bayer registered trade mark

Operation up to 140° C

Excellent resistance to all kinds of ageing (heat, oxygen, ozone, weathering).
Sensitive to ultraviolet radiation and light.
Good chemical resistance to ketones, alcohols, and diluted bases together with certain lubricants
(Lockheed, Skydrol).
Very low resistance to hydrocarbon solvents and oils.

(Butyl)

Operation up to 160° C

Butyl rubber vulcanates have excellent thermal, chemical and mechanical stability.
They age very well when exposed to ozone and heat.
Very good resistance to acids and bases at average levels of concentration and to polar solvents
and animal or vegetable oil.

(Fluorocarboné)

* Operation up to 250° C

High resistance to extreme temperatures: -50°C to +250°C.
Resistance to most fluids for industrial use.
Resistance to thermal cycles.
* Type A VITON. Dupont Dow Elastomers registered trade mark..

* type vapeur Utilisation jusqu’à 275° C

The vulconisates keep their technical characteristics better than standard FPM after heat exposure ageing
* Type B VITON. Dupont Dow Elastomers registered trade mark.

 * haute performance Utilisation jusqu’à 250° C

High resistance to extreme temperature: -50°C to +250°C.
Optimum resistance to chemical product.
* Type G VITON. Dupont Dow Elastomers registered trade mark.

This data is intended for information only. Please contact MCD to specify the elastomer best suited to your specific duty. Other types of elastomers can also be supplied
The information provided in this website is given in good faith and MCD is not able to accept any responsibility for the accuracy of its content, or any consequence that may arise from the use of the information supplied or materials describe.
MCD reserve th right to modify these information without any term of notice